Get Adobe Flash player

 

Ul. Miloša Crnjanskog bb/II
76 300 Bijeljina, Bosna i Hercegovina
Tel:+387 55 201 245
 

Marktstr. 15-17
46045 Oberhausen, Deutschland
Tel:+49 208 824 3717

Placement of raised floors

The raised floors are made of 600x600 mm panels, depending on customer’s request and standard requirements. The floor elements may be:

NORTEC calcium sulphate panels;

LIGNA chipboard panels;

FLOOR and more® (granite finish);

FLOOR and more® (parquet finish);

FLOOR and more® (coloured brick red).

The floor panels may also have special functions, such as:

  • Perforated FLOOR and more® Panel,
  • VENTEC Steel Ventilation Panel System,
  • THERMOFLOOR panels with heating installations

 

VENTILATION ETS round and hexagonal vent holes and electric and telephone outlet boxes may be embedded in the floor elements.

The raised floor boards are mounted on foots which are fixed to the floor by special glue and fastened with screws, as necessary. The foot consists of a base, threaded cylinder and supporting surface onto which the PVC coating is placed. Sealing bands are placed along the walls, and the concrete surface is coated with a special anti-dust agent.

Various types of flooring may be used on the installed raised floors: parquets, PVC, wall‑to‑wall carpeting, rubber, aluminium, stone or ceramic slabs, etc.

CALCIUM SULPHATE PANELS

Panel dimensions are 60x60 cm. They are installed onto supporting columns +5 to +200 cm high.

CHIPBOARD PANELS

Panel dimensions are 60x60 cm. They are installed onto supporting columns +5 to +200 cm high. The bottom side of the panels is coated with aluminium and steel sheet metal. PVC or parquet flooring may be used as the antistatic

GLASS PANELS

Panel dimensions are 60x60 cm. They are installed onto supporting columns +5 to +200 cm high.

METAL PANELS

Panel dimensions are 60x60 cm. They are installed onto supporting columns +5 to +200 cm high.

GYPSUM PANELS, corrugated, 60x60 cm